Battery Guide for NanoFoamer Lithium and NanoFoamer GO

If you’re choosing between the NanoFoamer Lithium and the NanoFoamer GO, one of the biggest differences is the battery. Both are designed for convenient use, but each product has its own power setup, runtime, and charging behavior. Below is a simple guide to help you understand what to expect from each one.

NanoFoamer Lithium battery details

The NanoFoamer Lithium uses an 18500 battery with a 1400 mAh capacity. In everyday use, it runs for about 90 seconds per cycle before automatically turning off. On a full charge, you can expect around 35 minutes of operating time, which is roughly 25 cycles.

Charging takes up to 7 hours, so it’s best to plan ahead and charge it when you are not in a hurry. Also, it is not recommended to use the device while it is charging.

NanoFoamer GO battery details

The NanoFoamer GO is powered by a 14430-650 battery with a 650 mAh capacity. Like the Lithium model, it runs for 90 seconds per cycle before auto-off. A full charge provides about 20 minutes of operating time, or around 14 cycles.

Its charging time is much faster, taking up to 2.5 hours to fully recharge. However, similar to the Lithium model, it cannot be used while charging.

Quick comparison

• NanoFoamer Lithium: 1400 mAh battery, about 35 minutes of use, up to 7 hours charging time.

• NanoFoamer GO: 650 mAh battery, about 20 minutes of use, up to 2.5 hours charging time.

In short, the NanoFoamer Lithium gives you longer battery life, while the NanoFoamer GO charges more quickly. Both models are built for simple, reliable operation with automatic shutoff to help save power.