How to Assemble the NanoFoamer PRO Gen-2 Lid
How to assemble the NanoFoamer PRO Gen-2 Lid
The NanoFoamer PRO Gen-2 comes with a spare lid and shaft that require a straightforward assembly process. Follow these simple steps to ensure your device is ready for use:
Remove the Impeller: Begin by unscrewing the impeller clockwise. Note that this is a reverse thread.
Detach the Nut and Silicone Washer: Carefully remove the nut and the silicone washer from the shaft.
Insert the Shaft: Place the shaft through the lid and turn it until you hear a click, indicating it is securely in place.
Reattach the Silicone Washer and Nut: Replace the silicone washer and nut. Tighten them by hand or use pliers for a gentle fit.
Reinstall the Impeller: Attach the impeller back to the shaft and lightly tighten it using a screwdriver in a counterclockwise direction.
Replace the NanoScreen: Finally, ensure the NanoScreen is appropriately positioned.
Watch the assembly video here.
If you encounter any issues or have further questions, feel free to email us at hello@subminimal.com