How to Replace a Broken Impeller on Your NanoFoamer Pro

If you own a NanoFoamer Pro GEN-1 or GEN-2 and have encountered a broken impeller, don't worry. This guide will walk you through the steps to safely remove the broken impeller and prepare for a replacement.

Steps to Remove the Broken Impeller

Before your new impeller arrives, follow these steps to remove the plastic remnants of the broken impeller from the shaft:

1. Take off the NanoScreen: Begin by removing the NanoScreen from your device.

2. Turn the knob to the highest level: This will help in loosening the impeller.

3. Place the lid on a flat surface: Ensure stability while you work on the device.

4. Secure the nut: Use a plier or your hand to hold the shaft and the black knob on top of the lid firmly to prevent them from twisting.

5. Unscrew the impeller: Turn it clockwise to unscrew and remove the broken pieces.

For a visual guide, you can watch the instructional video here.

Contact Support for Replacement

Once you have removed the broken impeller, contact our support team (hello@subminimal.com) to order a replacement part. We are here to assist you and ensure your NanoFoamer Pro is back in perfect working condition.