Troubleshooting Your Flick WDT Tool

Welcome to our comprehensive guide on troubleshooting your Flick WDT Tool! Whether you're dealing with a popped button or needles that just won't retract, we've got you covered with simple solutions and helpful resources. Let's dive in!

Popped Button

If you notice that the button on your Flick WDT Tool has popped, don't worry! This is usually due to a loose screw inside the button. Here's how you can fix it:

• Open the tip lid of your Flick WDT Tool. This is similar to the process of replacing the needles.

• Once the lid is open, locate the screw deep inside the housing.

• Use a screwdriver to tighten the screw, securing the button in place.

For a detailed guide on opening the cap, you can refer to this video:

Needles Stuck or Not Retracting

If the needles on your Flick WDT Tool are stuck or not retracting, it might be due to a loose screw or magnet. Here's how to resolve this issue:

• Open the Flick WDT Tool as you would when replacing the needles.

• Check the screw and magnet inside the tool.

• Tighten the screw to ensure the magnet attaches properly, allowing the needles to retract.

We hope this guide has been helpful in resolving any issues you may have with your Flick WDT Tool. Happy brewing!