Articles on: NanoFoamer PRO

Assembling the NanoFoamer PRO Gen-2 Lid

The spare lid & shaft for the NanoFoamer PRO ship separately and require a simple assembly. The process is simple and we include a video below as well:

Remove the impeller by unscrewing clockwise (it is a reverse thread).
Remove the nut and silicone washer
Place the shaft through the lid and turn it until it clicks into place
Replace the silicone washer & nut. Tighten by hand or lightly with a pair of pliers.
Replace the impeller and tighten lightly with a screwdriver (counterclockwise)
Replace the NanoScreen


Updated on: 31/07/2024

Was this article helpful?

Share your feedback

Cancel

Thank you!